Suspension System Threaded Bushings

Threaded Bushings to be bonded to the carbon fiber tubes. Ideal for Push/Pull rods, tie rods and A-arms.

Clear
SKU: B00-F7-022 Category:

Additional information

LEAD TIME

6 weeks

Weight [g]

15

Material

Ergal 7075-T6

Available Threaded Ends

M6, M8, 1/4", 5/16"

Colour

Anodised Black

Outside Diameter

15.5mm

Suggested Adhesive

Epoxy Resin 3M 9323

Suggested Adhesive Layer Thickness

between 0.1mm and 0.25mm

Suggested Adhesive Layer Length

between 1 and 1.5 times the diameter

Adhesive Bonding Tips

– Protect the surface that will not be bonded with adhesive tape to prevent the glue to stitch to them
– Scratch the Cylindrical surface of the Bushing that will be bonded with fine or very fine sandpaper until you will obtain an uniform opaque black colour.
– Clean thoroughly with acetone
– Clean with Compressed air
– Clean thoroughly with brake cleaner
– Clean with Compressed air
– Avoid touching the surface that will be glued
– Insert the bushing in the carbon fiber tube with a circular movement
– Remove the extra resin that came out the junction.

Download

[box]Download the Simplified 3D STEP model of the Suspension System Threaded Bushings RH. [/box]

[box]Download the Simplified 3D STEP model of the Suspension System Threaded Bushings LH. [/box]